The Importance Of Training When Repairing The Flanges !

Often, when the flange seal fails, we need to repair the flange sealing surface or sealing groove. There are two cases of sealing failure: one is that the sealing surface of the flange is corroded under high pressure or high temperature after long-term use, and the other is the deformation of the flange sealing surface caused by welding or collision. In situ,using a portable flange facing machines to repair the flange sealing surface is undeniable one of,if not the,most quickly and cost-effectively method.

Our rigid and versatile flange facing machine delivers high-torque preformance to quickly face pipe and valve flanges as well as repair sealing and bearing surfaces efficiently and cost-effectively. We and our agents will provide professional pre use training so that our customers can skillfully use the machines, which is also the premise of doing a good job of repairing flanges.

Portable flange facing machine often is used in dangerous locations(in elevated postion,near other operating equipment,overhead,etc.).MT PORTABLE can't foresee where the machine will be used;therefor,you must perform a site-specific risk assessment for each job before starting work.Do not operate this machine without adequate training to fully understand safe setup,operation,and maintenance.

If you have any questions with your machine and on-site repairing work,please contact  info@mtportable.com