Blue and Red Idea Social Network

PY3167 Acrylic Structural Adhesive

https://www.opticaladhesives.c....om/acrylic-adhesives

PY3167 High Performance Structure Adhesive is a 10:1 two components acrylic structure adhesive. Fixture time is 4-5 minutes at room temperature. It is especially suitable for bonding plastic and metal with a minimum of surface preparation.
Typical Applications
ABS、PMMA、PC、PS、Metals
Usage
1.Mixing part A and part B in the correct ratio and mix thoroughly. Once mixed, it should achieve a uniform color. It is recommended that either meter mix equipment or cartridges with static mix nozzles be used to properly ratio and dispense the adhesive.
2.To assure maximum bond strength, surfaces must be mated within the adhesive’s working time. Use enough material to completely fill the joint when parts are clamped.
3.Heat buildup during and after mixing is normal.

PY3168 Toughened Acrylic Structural Adhesive

https://www.opticaladhesives.c....om/Acrylic-Adhesives

PY3168 is a two-component Acrylic structural adhesive. This product cures quickly and has good toughness and impact resistance. It has excellent bonding performance on a variety of substrates such as plastics, metals, ceramics, ink-coated glass, etc.

Typical Applications
Structural bonding of electronic and electrical products, especially suitable for bonding applications requiring high impact resistance.

Chemical Resistance
Resistant to the following substances:
Acid - base PH: 3 - 10
Hydrocarbons
Salt solution
Not resistant to the following substances:
Polar solvent

Usage
1. Unpack the product and first extrude a small amount of glue to ensure that both components can be extruded and have good fluidity. Install the mixing tube and place the dual tubes into the appropriate dispensing equipment to ensure that the extruded glue is evenly mixed.
2. Apply the glue to the surface of the substrate, bond the sample parts within the operation time, and apply appropriate pressure for a certain period of time.
3. It can be initially cured at room temperature within 4 - 6 minutes. It can also be quickly cured by heating and can be put into use 2 hours later.

VMC 1266 CNC Vertical Milling Machine Center

https://www.josencnc.com/VMC-1....266-CNC-Vertical-Mac

The machine is suitable for heavy cutting and precision machining in the fields of automobile and locomotive parts production, automation parts, mold and **** frames, aerospace, etc. The three axes adopt high rigidity roller line rail with large span column, so that it has the heavy cutting rigidity and load bearing of hard rail machine, and at the same time has the high speed, high precision and long service life characteristics of line rail.

VMC 700 CNC Vertical Milling Center

https://www.josencnc.com/VMC-7....00-CNC-Vertical-Mach

Travel
X-Axis Travel: 700 mm
Y-Axis Travel: 400 mm
Z-Axis Travel: 350 mm
Worktable
Table Size (L × W): 850 × 400 mm
Maximum Table Load: 250 kg
T-Slot Size (Width × Quantity × Pitch): 14 × 3 × 125 mm
Spindle
Spindle Speed: 20,000 rpm
Spindle Drive Type: Direct Driven
Spindle Motor Power: 3.7 / 5.5 kW
Spindle Taper: BT30
Distance from Spindle Nose to Table Surface: 150–500 mm
Feed Rate
Rapid Traverse Rate (X/Y/Z): 48 / 48 / 48 m/min
Cutting Feed Rate: 10,000 mm/min
Tool Magazine (Optional)
Tool Changer Type: Arm-Type Servo ATC
Tool Capacity: 21 Tools
Maximum Tool Diameter: Φ80 mm
Maximum Tool Length: 200 mm
Maximum Tool Weight: 3 kg
Accuracy
Positioning Accuracy: ±0.005 mm
Repeatability Accuracy: ±0.003 mm
CNC Controller
Controller Options: FANUC 0i-MF / Mitsubishi M80
Machine Requirements
Air Pressure Requirement: 6 kg/cm²
Power Requirement: 20 kVA
Machine Information
Machine Weight: 3.2 Tons

VMC 1055 Heavy-duty Cutting Vertical Machining Center CV-1055F

https://www.josencnc.com/VMC-1....055-Heavy-duty-Cutti

Robust Structure: Key components are made of Meehanite castings, analyzed by finite element method and annealed, resulting in high rigidity and precision. The unique designs of the base, column, and spindle box ensure stable heavy - load processing.

Efficient Motion: The X/Y/Z axes are equipped with linear guides, enabling a rapid displacement of 36m/min. The absolute - type detection servo motors are directly connected to the lead screws, ensuring high efficiency and reliability.

Powerful Spindle: The spindle with precision angular contact ball bearings has a standard speed of 8,000rpm and can be equipped with high - torque motors. The excellent front - end protection design extends the spindle's service life.

Intelligent Cooling: The cutting fluid capacity is 250L (side - drain), and the double - box water tank design provides fast heat dissipation and saves space.