classification of industrial dust vacuum because the filter material fold into the use of cylinder, the filter material layout density is large, so the dust removal mechanism is compact, small volume; Filter cylinder height is small, easy to install, use and maintenance workload is small; The filter area of the same volume dust collector is relatively large, the filter wind speed is small, and the sniper is not big. Filter material folding requires strict sealing at both ends and no air leakage, otherwise it will affect the dust removal effect. The cylinder type dust collector is composed of air inlet pipe, air exhaust pipe, box, ash hopper, dust cleaning device, filter drum and electronic control device. The arrangement of the filter cylinder in the dust collector is very important, the filter cylinder can be arranged vertically on the box flower plate of the dust collector, can also be arranged tilted on the flower plate, fixed with bolts, and the rubber pad, the lower part of the flower plate is divided into the filter chamber, the upper part is divided into the clean gas chamber, the filter cylinder is fixed with bolts, the convenient method is automatic locking device and rubber pressing device, these two methods, It is convenient for installation and maintenance. The tilt Angle of the dust hopper should be fixed according to the rerest Angle of the dust, which should not be less than 60 degrees. The discharge valve of the cartridge dust collector should be tight. The height of the clean chamber of the cylinder dust collector should be convenient for the installation and maintenance of the pulse jet device.

　　classification of industrial dust vacuum structure is composed of air inlet pipe, exhaust pipe, box, ash bucket, ash cleaning device, diversion device, air distribution plate, filter cylinder and electronic control device, similar to the air box pulse bag dust collection structure. The arrangement of the filter cylinder in the dust collector is very important. It can be arranged vertically on the flower plate of the box body or tilted on the flower plate. From the effect of dust removal, the vertical arrangement is more correct. The lower part of the flower plate is the filter chamber, and the upper part is the air box pulse chamber. A airflow distribution plate is installed at the inlet of the dust collector.

　　Below, introduce the classification of industrial dust vacuum dust cover setting method:

　　First, the external dust removal cover is adopted, and the enclosure is installed at the lower part of the cover as far as possible to reduce the scope of dust suction.

　　2. The setting of dust collecting hood shall not hinder operation and maintenance.

　　3. Dust bearing air controlled by dust collecting hood does not pass through the operator's breathing area.

　　Four, under the condition of permitting, as far as possible the use of closed cover, so that the dust and the operator separate, and limited in the local.

　　5. When installing the receiving external dust cover, the direction of vacuuming should be consistent with the direction of dust particle ejection.

　　Vi. When setting the external dust removal cover, the cover mouth should be as close as possible to the place where dust occurs.

　　classification of industrial dust vacuum is composed of air inlet pipe, air exhaust pipe, box, ash bucket, ash cleaning device, diversion device, air distribution plate, filter cylinder and electronic control device, similar to the air box pulse bag dust removal structure. classification of industrial dust vacuum layout is very important, it can be arranged vertically in the box flower board, can also be arranged tilted on the flower board, from the effect of cleaning ash, vertical layout is more correct. The lower part of the flower plate is the filter chamber, and the upper part is the air box pulse chamber. A airflow distribution plate is installed at the inlet of the dust collector.

　　classification of industrial dust vacuum widely used in cement, steel, power, food, metallurgy, chemical industry and other industrial areas, the overall capacity increased several times, become a filter area 2000m2 large dust collector (GB6719-86 class), It is a solution to solve the old dust collector's difficulty in collecting dust, good filtering wind speed, poor cleaning effect, filter bag easy to wear and leak, and the operation cost is not low. Compared with all kinds of bag and electrostatic precipitator on the market, it has the characteristics of large filter area, low pressure difference, low emission, small volume, good service life and so on. It has become a new direction for the development of industrial dust collector.

　　classification of industrial dust vacuum https://www.kaisenfilter.com/classification-of-industrial-dust-vacuum.html