tea plucking machine wholesale is one of the important tools for family lawn maintenance, and the blade of tea plucking machine wholesale is the key component of lawn pruning. However, with the increase of use time, it can be found that the blade wear is more and more severe, which leads to the cutting effect of the blade. If the blades are not adjusted and replaced in time, tea plucking machine wholesale will not be able to complete the lawn mowing. Therefore, the adjustment and maintenance of tea plucking machine wholesale blade is very important.

First, understand the wear of the blade. Before adjusting the blade, you need to know the wear condition of the blade. If the blade is bent or damaged during use, it needs to be replaced in time. If the blade is worn but not damaged, it can then be adjusted and serviced.

2. Elevate the tea plucking machine wholesale. To adjust the tea plucking machine wholesale blade, raise the tea plucking machine wholesale. Usually, we can adjust the height of the tea plucking machine wholesale so that we can more easily access the blade of the tea plucking machine wholesale. So please remember to raise the tea plucking machine wholesale before adjusting.

3. Remove the blade. After elevating the tea plucking machine wholesale, the next step is to remove the blade. Before removing the blade, turn the tea plucking machine wholesale off and unplug it for safety. If you are using an electric tea plucking machine wholesale, place it in the cut-off position and unplug it for safety. If you are using oil powered tea plucking machine wholesale, you need to pull out the spark plug wire. Then, remove the blade using the appropriate size of the wrench.

Four, fixed blade. After removing the blade, the next step is to secure the blade. Usually, wooden images are used to hold the blade in one position. If you don't have a piece of wood, you can use clamps or other holding methods to hold the blade in place.

5. Check the blade. After securing the tea plucking machine wholesale blade, the next step is to inspect the blade. To ensure that the blade is not broken or bent. If the blade is faulty, replace it in time. If the blade looks good, it's time to adjust it.

6. Adjust the blade. After checking the blade, the next step is to adjust the blade. Please check the balance of the blade first. Using a balance tool, balance the blades as much as possible and keep them in the same position.

After adjusting the blade balance, you can adjust the blade. If the blade is dull, it can be finely ground using sandpaper, a knife sharpener, or other tools. If the blade is deflected or loose, it needs to be re-adjusted to ensure that the blade can fit correctly with the impeller of the tea plucking machine wholesale.

7. Install the blade. After adjusting the blade, install the blade. Make sure the blade is properly installed on the tea plucking machine wholesale and tighten the blade using a wrench.

If the tea plucking machine wholesale blade is not properly adjusted and maintained, it will affect the effect of mowing, and even damage the tea plucking machine wholesale. By mastering the method of adjusting the blade, you can keep the blade in a sharp state, so that when mowing the lawn, you can easily complete the job.

tea plucking machine wholesale https://www.keylead.cn/Electrical-Tea-Plucking-Machine