Analyze the reason of function of cyclone separator dust leakage

Comments · 294 Views

function of cyclone separator https://www.kaisenfilter.com/What-is-the-function-of-cyclone-separator.html

With the accumulation of dust on the surface of the filter material, the rate and resistance of the function of cyclone separator are increased accordingly. When the pressure difference on both sides of the filter material is very large, some of the fine dust particles have been attached to the filter material will be squeezed in the past. The rate of function of cyclone separator decreases. In addition, the function of cyclone separator resistance is too high will make the air volume of the dust removal system decreased significantly. Therefore, after the resistance of the function of cyclone separator reaches the value, the ash should be cleaned in time. Do not destroy the initial layer when cleaning, so as not to decrease the rate. General new filter material dust removal rate is not high enough. Filter material used for a period of time, due to screening, collision, retention, diffusion, electrostatic and other effects, the surface of the bag accumulated a layer of dust, this layer of dust is called the first layer, in the process of movement after this, the first layer became the main filter layer of the filter material, relying on the role of the first layer, large mesh filter material can also obtain a better filtration rate.

function of cyclone separator is a dry dust removal device. It is suitable for capturing fine, dry, non-fibrous dust. The filter bag is made of textile filter cloth or non-textile felt, and the dust containing gas is filtered by the filtration effect of fiber fabric. When the dust containing gas enters the function of cyclone separator, the dust with large particles and heavy ratio will settle down due to the action of gravity and fall into the ash hopper. When the gas containing finer dust passes through the filter material, the dust is blocked and the gas is purified. function of cyclone separator The working mechanism of cyclone separator is that the dust particles are filtered down by the dust-containing gas through the filter material. The coarse dust is mainly captured by the filter material by inertial collision, and the fine dust is mainly captured by diffusion and screening. The dust layer of filter material also has filtering effect.

Features of function of cyclone separator:

1, fine dust, generally up to more than, can be used in the purification requirements of the occasion.

2, strong adaptability, can capture all kinds of nature of dust, and does not affect the dust removal rate due to the specific resistance properties of dust, adapt to a wide range of dust concentration, and when the inlet concentration or smoke volume changes, will not affect the purification rate and operation resistance.

3, easy to recycle materials, no pollution, waste water and other secondary pollution.

4. Various specifications and flexible use. The treated air volume can range from several hundred to several million cubic meters per hour.

5, by the filter media is not afraid of temperature, such as performance restrictions, the use of temperature can not be too high, some corrosive gases can not be selected.

6. When collecting dust with strong viscosity and hygroscopic property or dealing with flue gas with high dew point, it is easy to block the filter bag and affect the normal work.

7. function of cyclone separator has the problems of large area, easy damage of filter bag and high maintenance cost.

function of cyclone separator https://www.kaisenfilter.com/What-is-the-function-of-cyclone-separator.html

Comments
ADVERTISE || APPLICATION || AFFILIATE