Clearing and Storage of Your Flange Facing Machine

MT Portable Machines delivers the most powerful and versatile lineup of Flange Facing Machines in the industry.

Clearing and storage may not be the most exciting topic of discussion but correct clearing and storage will help assure that you can get your work done and maximize the service life of your Flange Facing Machines. Therefore, it is very important to do a good job of cleaning and storage of the flange end face machine. The following will introduce the cleaning and storage methods of professional flange end facers.

Clearing:

When machining, a buildup of swarf can occur. When finish a complex on-site machining work, there are often a large number of chips, greasy dirt and dust adsorbed on the surface of important transmission parts of the machine, such as guide rails, lead screws, etc. Wear protective gloves to clear the machine carefully after each use.

Storage:

Storing the machine in the original metal box will extend the longevity of the machine. Before storing make sure the machine is clean and dry. Pay particular attention to the V grooves in the rail. Grease the leadscrew and slide ways (using WD40 or similar) before storing the machine. Classify the parts and put them in the lattice of the board to prevent the parts from being damaged.

If you have additional questions or would like to learn more about our Products, contact info@mtportable.com today – We are here to help.