cordless grass and hedge trimmer Common faults and solutions

Comments · 7 Views

cordless grass and hedge trimmer https://www.keylead.cn/Grass-Mower-KLD-BC4302.html

The following article mainly introduces the common faults and solutions of cordless grass and hedge trimmer. It is practical and I hope it can help you!

1. Belt slip occurs during the production of cordless grass and hedge trimmer.

Cause: uneven feeding, resulting in cordless grass and hedge trimmer clogging; Improper matching of belt and pulley; The motor is fixed loosely.

Solution: uniform cutting; Replace the belt or pulley with the manufacturer, accessories must be appropriate; Check screw fastening regularly to ensure screw fastening.

2. cordless grass and hedge trimmer are blocked.

Reason: blade aging, fracture; The hole of the screen is blocked or broken; The water content of the crushed material is too large.

Solution: Check the use of the blade in time, find the problem in time to replace; Clean the screen regularly to ensure that the screen is clean; Ensure that the water content of the crushed material is less than 14%.

3, cordless grass and hedge trimmer Slow or no discharge.

Cause: The air inlet is not open or the screen is blocked.

Solution: check the baffle plate of the air inlet and open the air inlet; Check the use of the screen and clean it in time.

4, cordless grass and hedge trimmer production decreased during use.

Cause: blade wear; Changes in materials (different materials have different hardness and humidity, which will cause changes in the output of the machine during the crushing process).

Solution: Replace a new blade; If it is due to the replacement of crushed materials caused by the decline in production is normal.

cordless grass and hedge trimmer https://www.keylead.cn/Grass-Mower-KLD-BC4302.html

Comments
ADVERTISE || APPLICATION || AFFILIATE



AS SEEN ON
AND OVER 250 NEWS SITES
Verified by SEOeStore